The 'standard plots' for EB051 are as follows:

  eb051-weight.ps               station weight vs. time 
  eb051-auto-[1,2].ps           station autocorrelation vs. freq
  eb051-cross-[1,2][a,p].ps     baseline amp/phs vs. freq
  eb051-ampphase-[a,p].ps       Ef-* baseline amp/phs vs. time,

The auto and cross plots show data from scans 32 [1] and 225 [2],
both of J1041+0610.  The ampphase plots show amp [a] or phase [p] 
vs. time for the whole experiment, omitting target scans.  
Since the two passes differ only in the target scans, there is only
one set of plots for the whole experiment.

The antenna numbering in these plots is 0-based -- thus one less than the
corresponding antenna numbers in the AIPS FITS file.


(a) WEIGHT plots

  The plots shows the weights for all IFs/pols per station, with each
1s integration plotted as a separate ".".   The IF/pol color-coding for
the continuum plot is:

 IF1/RR = red    IF1/LL = blue      IF2/RR = cyan        IF2/LL = green
 IF3/RR = pink   IF3/LL = med.grey  IF4/RR = brown       IF4/LL = purple
 IF5/RR = teal   IF5/LL = yellow    IF6/RR = steel blue  IF6/LL = lt.grey
 IF7/RR = black  IF7/LL = orange    IF8/RR = lt.green    IF8/LL = lt.purple



(b) AUTOCORRELATION SPECTRA plots

  The plots show data from 1 minute of the scans listed above.  The IFs 
for a station are plotted side-by-side, with RFI in one IF able to throw 
off the y-axis scale for other IFs.  The polarization color-coding is 
RR=red, LL=blue. 


(c) BASELINE SPECTRA plots 

  The baseline vs. frequency plots show vector-averaged amplitude and phase 
for all baselines for same the time ranges as the autocorrelation plots, with
amp & phase going to separate plots using the same baseline lay-out on the 
page.  The polarization color-coding remains RR=red, LL=blue.


(d) AMP/PHASE(t) plots 

  The baseline vs. time plots show amplitude and phase for non-target scans 
on Ef-*, with amp & phase going to separate plots.  Each 1s integration 
is plotted as a separate ".", with the middle 80% of the band used for 
vector-averaging over frequency.  The plots have the same IF/pol color-coding
as in the weight plots.