The 'standard plots' for ED038 are as follows:

  ed038.{pass}-weight.ps                station weight vs. time 
  ed038.{pass}-auto-[1,2].ps            station autocorrelation vs. freq
  ed038.{pass}-cross-[1,2][a,p].ps      baseline amp/phs vs. freq
  ed038.{pass}-ampphase-[a,p].ps        Ef-* baseline amp/phs vs. time

The {pass} string specficies the pass from which the standard plots come:
   psr = pulsar gated (16 frq.pt. per IF/pol, 2s integrations).
   wfm = wide-field mapping (512 frq.pt. per IF/pol, 0.25s integrations).
   mphc = multiple-phase centers (16 frq.pt. per IF/pol, 2s integrations;
      here, only the first of the 50 output files is used, since the
      non-target scans are the same in each).

The auto and cross plots show data from the scans 5 and 17 (both J1025+1253).
Jb was out for the first of these, and Ro was out for the second.
The ampphase plots show amp [a] or phase [p] vs. time for the whole
experiment, omitting target scans.  Variants of the phase(t) plots
are described below.

The antenna numbering in these plots is 0-based -- thus one less than the
corresponding antenna numbers in the AIPS FITS file.


(a) WEIGHT plots

  The plots shows the weights for all IFs/pols per station, with each
integration plotted as a separate ".".   The IF/pol color-coding is:

 IF1/RR = red    IF1/LL = blue      IF2/RR = cyan        IF2/LL = green
 IF3/RR = pink   IF3/LL = med.grey  IF4/RR = brown       IF4/LL = purple
 IF5/RR = teal   IF5/LL = yellow    IF6/RR = steel blue  IF6/LL = lt.grey
 IF7/RR = black  IF7/LL = orange    IF8/RR = lt.green    IF8/LL = lt.purple



(b) AUTOCORRELATION SPECTRA plots

  The plots show data from the scans listed above.  The IFs for each station
go into separate plots along a row for the wide-field-mapping pass, to avoid 
RFI in one from affecting the y-axis scale of others.  Since each plot 
self-scales, y-axes may not go down to zero.  The polarization color-coding
is RR=red, LL=blue. 


(c) BASELINE SPECTRA plots 

  The baseline vs. frequency plots show vector-averaged amplitude and phase 
for all baselines for same the time ranges as the autocorrelation plots, with
with amp & phase going to separate plots using the same baseline lay-out on
the page.  Here, all IFs for a baseline have the same scale, even for the 
wide-field-mapping pass.  The polarization color-coding remains RR=red, LL=blue. 


(d) AMP/PHASE(t) plots 

  The baseline vs. time plots show amplitude and phase for J1025+1253 scans,
with amp & phase going to separate plots.  Each integration is plotted as
a separate ".", with the middle 80% of the band used for vector-averaging
over frequency.  These plots have the same IF/pol color-coding as in the 
weight plots, unless specified below.  There are some variants for
the phase(t) plots:
   [p2] - integration number within the set of J1025 integrations, rather 
        than UT, is plotted along the x-axis, to avoid compressing that
        dimension with predominantly white-space.
   [p2LCP] - the same as [p2], but plotting only LL, to avoid the clutter
       of Ro having weak/missing RR.
   [p3LCP] - only for the psr pass, phase(t) with time along the x-axis
       plotting only LL, but also including the gated pulsar data.

The color-coding for the LCP-only plots is:
 IF1/LL = red    IF2/LL = blue      IF3/LL = cyan        IF4/LL = green
 IF5/LL = pink   IF6/LL = med.grey  IF7/LL = brown       IF8/LL = purple