EVN User Experiment Pipeline Feedback


Pipeline feedback for experiment N10SX2. If you have any comments on this experiment please email the address below.
A detailed description of the pipeline output is available.


Last updated: Wed Dec 29 13:15:30 CET 2010 yang@jive.nl


General Comments. ( Brief data summary and scan listing )
The S/X band NME experiment N10SX2 was performed on 8 November 2010. The experiment used 5 stations with a recording data rate of 512 Mbps (16 x 8 MHz, 2bit sampling, RCP only). S and X band data were in IF 1-8 and IF 9-16 X respectively. Ef was used as the reference station in the pipelining data reduction.

The EVN reliability indicator (ERI) for this experiment was ERI = 0.78 . ERI* = 1 . (Ef=1, Mc=1, On=1, Hh=1, Ys=0.5). Yebes particated in the observations in the first 1 hour and 15 minute. Later, it stopper observations because of strong winds.


Plots of the autocorrelations
Comments.
Each scan plotted separately, all stations.


plots of the uncalibrated amplitude and phase against time
Comments.
Full-experiment for Ef-* baselines, no calibration applied.


Plots of the uncalibrated amplitude and phase against frequency channel
Comments.
Scalar averaged Ef-* baselines, each scan plotted separately. No calibration applied yet. Same clock model was used at both S and X band. At S band, the delay is a bit of larger.


The uncalibrated amplitude and phase of the crosshand correlations against frequency channel (not available)
Comments.


TSYS against time
Comments.
TY1 table, each IF/pol on a separate plot.


Telescope sensitivities from the a priori TSYS and Gain curves (the square of this number gives the antenna noise (SEFD) in Jy - the smaller the better).
Comments.
Gain amplitude from CL2 table.


Fringe-fit phase solutions (including Parallactic Angle correction).
Comments.
FRING_PHAS CL3 station phase solutions -- CL3 = CL2+SN2, thus also includes the initial amplitude/parallactic angle calibration from CL2 and the fringe solutions from SN2.


Fringe-fit delay solutions
Comments.
SN2 station delay solutions for the fringed sources, each IF/pol on a separate plot.


Fringe-fit rate solutions
Comments.
SN2 station rate solutions.


Telescope bandpasses
Comments.
Bandpass table 1.


Calibrated amplitude and phase against time (a priori amplitude calibration and fringe-fit solutions applied).
Comments.
Full-experiment for Ef-* baselines, calibrated with CL3.


Calibrated amplitude and phase against frequency channel
Comments.
Ef-* baselines calibrated with CL3 and BP1. The amp and phase plots self-scale, not necessarily going down to 0 in the case of the amps.


Naturally weighted dirty map (not useful for bright sources) produced before self-cal of:
J1834-0301: pdf (not available) , or FITS (not available) .
J1751+0939: pdf (not available) , or FITS (not available) .
J1825-0737: pdf (not available) , or FITS (not available) .
Comments.


Uniformly weighted dirty map (not useful for bright sources) produced before self-cal of:
J1834-0301: pdf (not available) , or FITS (not available) .
J1751+0939: pdf (not available) , or FITS (not available) .
J1825-0737: pdf (not available) , or FITS (not available) .
Comments.


Phase corrections applied to a priori calibrated and fringe-fitted data by self-calibration.
J1834-0301 .
J1751+0939 .
J1825-0737 .
Comments.
Plots of post-SPLIT tables SN1 for the sources.


Amplitude corrections applied to a priori calibrated and fringe-fitted data by self-calibration.
J1834-0301: pdf , or text file , or statistical summary .
J1751+0939: pdf , or text file , or statistical summary .
J1825-0737: pdf , or text file , or statistical summary .
Comments.
As above, but for the post-SPLIT table SN2.


Telescope sensitivities (the total AMP gain applied during both a priori and self calibration; the square of this number gives the antenna noise (SEFD) in Jy).
Comments.


Residual closure phase (visibility closure phase with model closure phase subtracted) for:
J1834-0301 .
J1751+0939 .
J1825-0737 .
Comments.
Separate files per (fringed) source, showing closure phase plots for all the triangles (not just Ef-*-*). Only stokes=I shown.


Calibrated visibilities and the source model of:
J1834-0301 .
J1751+0939 .
J1825-0737 .
Comments.
For each (fringed) source, plots of amp/phase on Ef-* baselines, calibrated with (post-SPLIT) table CL3, with a model-line overplotted.


Calibrated visibilities against u,v distance for:
J1834-0301: pdf , or png .
J1751+0939: pdf , or png .
J1825-0737: pdf , or png .
Comments.
For each source, a plot of amp vs. |uv| distance at both S and X band.


u,v coverage for:
J1834-0301: pdf , or png .
J1751+0939: pdf , or png .
J1825-0737: pdf , or png .
Comments.
For each source, a plot of the u-v coverage. Note that Both S and X band u-v coverage were ploted in the same image.


Crude maps of sources:
J1834-0301: pdf , or FITS .
J1751+0939: pdf , or FITS .
J1825-0737: pdf , or FITS .
Comments.
Note that both S and X band data were used to make the crude image.