GENERAL The S/X band NME experiment N12SX1 was performed on 25 May 2012. The experiment used 11 stations with a recording data rate of 512 Mbps (16 x 8 MHz, 2bit sampling, RCP only). S and X band data were in IF 1-8 and IF 9-16 X respectively. Ys was used as the reference station in the pipelining data reduction. /// ERIVAL 0.6 /// ERISTAR 0.6 /// ERICOMM (Ef=0.9, Wb=0, Mc=1, On=1, Hh=1, Ys=1, Nt=0, Ur=1, Sv=1, Zc=1, Bd=1). /// POSSM_AUTOCORR Each scan plotted separately, all stations. /// VPLOT_UNCAL Full-experiment for Ef-* baselines, no calibration applied. /// POSSM_UNCAL Scalar averaged Ef-* baselines, each scan plotted separately. No calibration applied yet. Same clock model was used at both S and X band. At S band, the delay is a bit of larger. /// POSSM_CPOL /// TSYS TY1 table, each IF/pol on a separate plot. /// GAIN Gain amplitude from CL2 table. /// FRING_PHAS /// FRING_DELAY SN2 station delay solutions for the fringed sources, each IF/pol on a separate plot. /// FRING_RATE SN2 station rate solutions. /// FRING_PHAS CL3 station phase solutions -- CL3 = CL2+SN2, thus also includes the initial amplitude/parallactic angle calibration from CL2 and the fringe solutions from SN2. /// BANDPASS Bandpass table 1. /// VPLOT_CAL Full-experiment for Ef-* baselines, calibrated with CL3. /// POSSM_CAL Ef-* baselines calibrated with CL3 and BP1. The amp and phase plots self-scale, not necessarily going down to 0 in the case of the amps. /// IMAPN /// IMAPU /// CALIB_PHAS1 Plots of post-SPLIT tables SN1 for the sources. /// CALIB_AMP2 As above, but for the post-SPLIT table SN2. /// SENS /// CLPHS Separate files per (fringed) source, showing closure phase plots for all the triangles (not just Ef-*-*). Only stokes=I shown. /// VPLOT_MODEL For each (fringed) source, plots of amp/phase on Ef-* baselines, calibrated with (post-SPLIT) table CL3, with a model-line overplotted. /// UVCOV For each source, a plot of the u-v coverage. Note that Both S and X band u-v coverage were ploted in the same image. /// UVPLT For each source, a plot of amp vs. |uv| distance at both S and X band. /// ICLN Note that both S and X band data were used to make the crude image. ///