EVN User Experiment Pipeline Feedback
Last updated: Tue Aug 6 17:12:53 CEST 2013
duev@jive.nl
General Comments.
(
Brief data summary
and
scan listing
)
The C-band NME experiment N13C2 was conducted on 24 May 2013. 15 stations participated in the experiment, mode 512-8-2, dual pol. Ef was used as the reference station in the pipelining data reduction. The sources 0234+285 and 3C84 were the bandpasss calibrators.
The EVN reliability indicator (ERI) for this experiment was
ERI = 0.83. ERI* = 0.83 .
Plots of the autocorrelations
Comments.
Each scan plotted separately, all stations.
plots of the uncalibrated amplitude and phase
against time
Comments.
Full-experiment for Ef-* baselines, no calibration applied. A 0.2 minute plot-averaging was used.
Plots of the uncalibrated amplitude and phase
against frequency channel
Comments.
Scalar averaged Ef-* baselines, each scan plotted separately. No calibration applied yet.
The uncalibrated amplitude and phase of the crosshand
correlations against frequency channel
Comments.
TSYS against time
Comments.
TY1 table, each IF/pol on a separate plot.
Telescope sensitivities
from the a priori TSYS and Gain
curves (the square of this number gives the antenna noise (SEFD) in Jy - the
smaller the better).
Comments.
Gain amplitude from CL2 table.
Fringe-fit phase solutions
(including Parallactic
Angle correction).
Comments.
CL3 station phase solutions -- CL3 = CL2+SN2, thus also includes the initial amplitude/parallactic angle calibration from CL2 and the fringe solutions from SN2.
Fringe-fit delay solutions
Comments.
SN2 station delay solutions for the fringed sources, each IF/pol on a separate plot. For this experiment, one lag corresponds to 1/16 microsecond of delay.
Fringe-fit rate solutions
Comments.
SN2 station rate solutions.
Telescope bandpasses
Comments.
Bandpass table 1. 0234+285 and 3C84 were used for bandpass calibration.
Calibrated amplitude and phase against time
(a
priori amplitude calibration and fringe-fit solutions applied).
Comments.
Full-experiment for Ef-* baselines, calibrated with CL3. The 0.2-min plot-averaging still applied.
Calibrated amplitude and phase against frequency
channel
Comments.
Ef-* baselines calibrated with CL3 and BP1. The amp and phase plots self-scale, not necessarily going down to 0 in the case of the amps.
Naturally weighted dirty map (not useful for bright sources)
produced before self-cal of:
DA193: pdf (not available)
, or
FITS (not available)
.
0234+285: pdf (not available)
, or
FITS (not available)
.
0548+378: pdf (not available)
, or
FITS (not available)
.
Comments.
Uniformly weighted dirty map (not useful for bright sources)
produced before self-cal of:
DA193: pdf (not available)
, or
FITS (not available)
.
0234+285: pdf (not available)
, or
FITS (not available)
.
0548+378: pdf (not available)
, or
FITS (not available)
.
Comments.
Phase corrections applied to a priori calibrated and
fringe-fitted data by self-calibration.
DA193
.
0234+285
.
0548+378
.
Comments.
Plots of post-SPLIT tables SN1 for the sources that have been individually fringed.
Amplitude corrections applied to a priori calibrated and
fringe-fitted data by self-calibration.
DA193:
pdf
, or
text file
, or
statistical summary
.
0234+285:
pdf
, or
text file
, or
statistical summary
.
0548+378:
pdf
, or
text file
, or
statistical summary
.
Comments.
As above, but for the post-SPLIT table SN2.
Telescope sensitivities
(the total AMP gain applied
during both a priori and self calibration; the square of this number gives the
antenna noise (SEFD) in Jy).
Comments.
CL4 gain-amp.
Residual closure phase (visibility closure phase with model closure phase subtracted) for:
DA193
.
0234+285
.
0548+378
.
Comments.
Separate files per (fringed) source, showing closure phase plots for all the triangles. Only stokes=I shown.
Calibrated visibilities and the source model of:
DA193
.
0234+285
.
0548+378
.
Comments.
For each (fringed) source, plots of amp/phase on Ef-* baselines, calibrated with (post-SPLIT) table CL3, with a model-line overplotted.
Calibrated visibilities against u,v distance for:
DA193:
pdf
, or
png
.
0234+285:
pdf
, or
png
.
0548+378:
pdf
, or
png
.
Comments.
For each source, a plot of amp vs. |uv| distance.
u,v coverage for:
DA193:
pdf
, or
png
.
0234+285:
pdf
, or
png
.
0548+378:
pdf
, or
png
.
Comments.
For each source, a plot of the u-v coverage.
Crude maps of sources:
DA193:
pdf
, or
FITS
.
0234+285:
pdf
, or
FITS
.
0548+378:
pdf
, or
FITS
.
Comments.
For each source, a CLEAN map resulting from the automated fringing and self-cal iterations in the pipeline script.