EVN User Experiment Pipeline Feedback


Pipeline feedback for experiment N14M2. If you have any comments on this experiment please email the address below.
A detailed description of the pipeline output is available.

Last updated: Wed Aug 20 15:20:08 CEST 2014 surcis@jive.nl

General Comments. ( Brief data summary and scan listing )
N14M2 had 12 stations (including DBBC from T6, and Ys which are listed as Td, and Yd, respectively), 16 x 8 MHz IFs, 4 polarizations, and used 64 frequency points per IF/pol, with 2s integrations. The SOLINT was set at 1.0 min. Ef was used as reference station. The fringe-finder and bandpass calibrator was '3C286', '3C345', and 'J1310+3220'. The continuum target sources 'J1329+3154' and 'J1640+3946' were calibrated using the phase-reference sources '3C286' and '3C345', respectively.

The EVN reliability indicator (ERI) for this experiment was ERI = 1.00 . ERI* = 1.00 . (EF=1, WB=1, JB=1, ON=1, NT=1, TR=1, YS=1, SH=1, Sr=1, T6=1, TD=1, YD=1)

Plots of the autocorrelations
Comments.
Each scan plotted separately, all stations. TD and YD are also plotted here. T6: difference of amplitude between even and odd IFs in scan #01.

plots of the uncalibrated amplitude and phase against time
Comments.
Full-experiment for Ef-* baselines, no calibration applied.TD and YD are also plotted here.

Plots of the uncalibrated amplitude and phase against frequency channel
Comments.
Scalar averaged Ef-* baselines, each scan plotted separately. No calibration applied yet. TD and YD are also plotted here. YD show a difference in amplitude between RR and LL.

The uncalibrated amplitude and phase of the crosshand correlations against frequency channel
Comments.
Scalar averaged Ef-* baselines for LR, each scan plotted separately. No calibration applied yet. TD and YD are also plotted here.

TSYS against time
Comments.
TY1 table, each IF/pol on a separate plot.

Telescope sensitivities from the a priori TSYS and Gain curves (the square of this number gives the antenna noise (SEFD) in Jy - the smaller the better).
Comments.
Gain amplitude from CL2 table.

Fringe-fit phase solutions (including Parallactic Angle correction).
Comments.
CL3 station phase solutions -- CL3 = CL2+SN2, thus also includes the initial amplitude/parallactic angle calibration from CL2 and the fringe solutions from SN2.

Fringe-fit delay solutions
Comments.
SN2 station delay solutions for the fringed sources, each IF/pol on a separate plot.

Fringe-fit rate solutions
Comments.
SN2 station rate solutions.

Telescope bandpasses
Comments.
Bandpass table 1.

Calibrated amplitude and phase against time (a priori amplitude calibration and fringe-fit solutions applied).
Comments.
Full-experiment for Ef-* baselines, calibrated with CL3.

Calibrated amplitude and phase against frequency channel
Comments.
Ef-* baselines calibrated with CL3 and BP1. The amp and phaseplots self-scale, not necessarily going down to 0 in the case of the amps. T6: a big jump in the amplitude between odd and even IFs during first scan.

Naturally weighted dirty map (not useful for bright sources) produced before self-cal of:
3C345: pdf , or FITS .
J1329+3154: pdf , or FITS .
J1310+3220: pdf (not available) , or FITS (not available) .
3C286: pdf , or FITS .
J1640+3946: pdf , or FITS .
Comments.
Naturally weighted dirty map of the targets.

Uniformly weighted dirty map (not useful for bright sources) produced before self-cal of:
3C345: pdf , or FITS .
J1329+3154: pdf , or FITS .
J1310+3220: pdf (not available) , or FITS (not available) .
3C286: pdf , or FITS .
J1640+3946: pdf , or FITS .
Comments.
Uniformly weighted dirty map of the targets.

Phase corrections applied to a priori calibrated and fringe-fitted data by self-calibration.
3C345 .
J1329+3154 .
J1310+3220 .
3C286 .
J1640+3946 .
Comments.
Plots of post-SPLIT tables SN1 for the sources.

Amplitude corrections applied to a priori calibrated and fringe-fitted data by self-calibration.
3C345: pdf , or text file , or statistical summary .
J1329+3154: pdf , or text file , or statistical summary .
J1310+3220: pdf , or text file , or statistical summary .
3C286: pdf , or text file , or statistical summary .
J1640+3946: pdf , or text file , or statistical summary .
Comments.
As above, but for the post-SPLIT table SN2.

Telescope sensitivities (the total AMP gain applied during both a priori and self calibration; the square of this number gives the antenna noise (SEFD) in Jy).
Comments.
CL4 gain-amp.

Residual closure phase (visibility closure phase with model closure phase subtracted) for:
3C345 .
J1329+3154 .
J1310+3220 .
3C286 .
J1640+3946 .
Comments.
Separate files per (fringed) source, showing closure phase plots for all the triangles (not just Ef-*-*). Only stokes=I shown.

Calibrated visibilities and the source model of:
3C345 .
J1329+3154 .
J1310+3220 .
3C286 .
J1640+3946 .
Comments.
For each (fringed) source, plots of amp/phase on Ef-* baselines, calibrated with (post-SPLIT) table CL3, with a model-line overplotted.

Calibrated visibilities against u,v distance for:
3C345: pdf , or png .
J1329+3154: pdf , or png .
J1310+3220: pdf , or png .
3C286: pdf , or png .
J1640+3946: pdf , or png .
Comments.
For each source, a plot of amp vs. |uv| distance.

u,v coverage for:
3C345: pdf , or png .
J1329+3154: pdf , or png .
J1310+3220: pdf , or png .
3C286: pdf , or png .
J1640+3946: pdf , or png .
Comments.
For each source, a plot of the u-v coverage.

Crude maps of sources:
3C345: pdf , or FITS .
J1329+3154: pdf , or FITS .
J1310+3220: pdf , or FITS .
3C286: pdf , or FITS .
J1640+3946: pdf , or FITS .
Comments.
For each source, a CLEAN map resulting from the automated fringing and self-cal iterations (or phase-referencing) in the pipeline script.