The 'standard plots' for RM007 are as follows:

  rm007-weight.ps                  station weight vs. time 
  rm007-auto-[1,2].ps              station autocorrelation amp vs. freq
  rm007-cross-[1,2][a,p].ps        baseline amp/phs vs. freq
  rm007-ampphase-[1,2,3][a,p].ps   Ef-* baseline amp/phs vs. time

The auto and cross plots show 1 minutes of data from scan 14 (0420-014) [1]
and scan 36 (ORIKL) [2] (no phase(frq) for scan36).  The ampphase plots show 
amp [a] or phase [p] vs. time for the fringe-finders in scan 1-14 [1],
the whole experiment omitting target scans [2], and the amp(t) for the
maser scans [3].

The antenna numbering in these plots is 0-based -- thus one less than the
corresponding antenna numbers in the AIPS FITS file.


(a) WEIGHT plots

  The plot shows the weights for all IFs (parallel-hands only) per station,
with each 0.5s integration plotted as a separate ".".   The IF/pol 
color-coding is:  IF1/RR = red    IF1/LL = blue      


(b) AUTOCORRELATION SPECTRA plots

  The plots show 1 minute of data from the scans listed above.  
The polarization color-coding is:  RR=red, LL=blue, RL=cyan, LR=green.  


(c) BASELINE SPECTRA plots 

  The baseline vs. frequency plots show vector-averaged amplitude and phase 
for all baselines for the same 1-minute segments of the scans in the 
autocorrelation plots, with amp & phase going to separate plots using the 
same baseline lay-out on the page.  The polarization color-coding remains 
RR=red, LL=blue, RL=cyan, LR=green.   The phase(freq) plot omits the
cross-pols.  Plot [2] shows the middle 200 frequency points of amp(phase)
for a maser scan.


(d) AMP/PHASE(t) plots 

  The baseline vs. time plots show amplitude and phase on Ef-* in a variety
of subsets.  Each 0.5s integration is plotted as a separate ".", with the 
middle 80% the band used for vector-averaging over frequency for continuum
sources.  Plots [1] shows scan 1-14, comprising the early run of fringe-finders.
Plots [2] show all non-target scans.  These two sets show only the parallel-hand
polarizations, with ths phase(t) plot for the whole experiment showing just
one polarization.  Plot [3] shows amp(t) for all maser scans, averaged over
16 frequency points centered on the feature at frequency-point 1040.  The
color-coding for the amp(t) plots is the same as in the baseline cross-plots, 
up to the number of polarizations plotted.