EVN User Experiment Pipeline Feedback


Pipeline feedback for experiment N14C3. If you have any comments on this experiment please email the address below.
A detailed description of the pipeline output is available.

Last updated: Wed Jan 28 15:19:21 CET 2015 surcis@jive.nl

General Comments. ( Brief data summary and scan listing )
N14c3 had 12 stations, 8 x 16 MHz IFs, 2 polarizations, and used 64 frequency points per IF/pol, with 2s integrations. The SOLINT was set at 1.0 min. Ef was used as reference station. The fringe-finder and bandpass calibrator was '3C345', '148+283', and '2023+336'. The continuum target sources 'J1640+3946' and 'J1849+3024' were calibrated using the phase-reference sources '3C345' and '1848+283', respectively.

The EVN reliability indicator (ERI) for this experiment was ERI = 1.00 . ERI* = 1.00 . (EF=1, WB=1, JB=1, ON=1, NT=1, TR=1, SV=1, ZC=1, BD=1, SH=1, HH=1, YS=1)

Plots of the autocorrelations
Comments.
Each scan plotted separately, all stations. Several RFIs.

plots of the uncalibrated amplitude and phase against time
Comments.
Full-experiment for Ef-* baselines, no calibration applied. here.

Plots of the uncalibrated amplitude and phase against frequency channel
Comments.
Scalar averaged Ef-* baselines, each scan plotted separately. No calibration applied yet. Only LCP for Sv.

The uncalibrated amplitude and phase of the crosshand correlations against frequency channel
Comments.
Scalar averaged Ef-* baselines for LR, each scan plotted separately. No calibration applied yet.

TSYS against time
Comments.
TY1 table, each IF/pol on a separate plot.

Telescope sensitivities from the a priori TSYS and Gain curves (the square of this number gives the antenna noise (SEFD) in Jy - the smaller the better).
Comments.
Gain amplitude from CL2 table.

Fringe-fit phase solutions (including Parallactic Angle correction).
Comments.
CL3 station phase solutions -- CL3 = CL2+SN2, thus also includes the initial amplitude/parallactic angle calibration from CL2 and the fringe solutions from SN2. Only LCP solutions for Sv.

Fringe-fit delay solutions
Comments.
SN2 station delay solutions for the fringed sources, each IF/pol on a separate plot. Only LCP solutions for Sv.

Fringe-fit rate solutions
Comments.
SN2 station rate solutions. Only LCP solutions for Sv.

Telescope bandpasses
Comments.
Bandpass table 1.

Calibrated amplitude and phase against time (a priori amplitude calibration and fringe-fit solutions applied).
Comments.
Full-experiment for Ef-* baselines, calibrated with CL3.

Calibrated amplitude and phase against frequency channel
Comments.
Ef-* baselines calibrated with CL3 and BP1. The amp and phaseplots self-scale, not necessarily going down to 0 in the case of the amps.

Naturally weighted dirty map (not useful for bright sources) produced before self-cal of:
3C345: pdf (not available) , or FITS (not available) .
J1640+3946: pdf , or FITS .
2023+336: pdf (not available) , or FITS (not available) .
J1849+3024: pdf , or FITS .
1848+283: pdf (not available) , or FITS (not available) .
Comments.
Naturally weighted dirty map of the targets.

Uniformly weighted dirty map (not useful for bright sources) produced before self-cal of:
3C345: pdf (not available) , or FITS (not available) .
J1640+3946: pdf , or FITS .
2023+336: pdf (not available) , or FITS (not available) .
J1849+3024: pdf , or FITS .
1848+283: pdf (not available) , or FITS (not available) .
Comments.
Uniformly weighted dirty map of the targets.

Phase corrections applied to a priori calibrated and fringe-fitted data by self-calibration.
3C345 .
J1640+3946 (not available) .
2023+336 .
J1849+3024 (not available) .
1848+283 .
Comments.
Plots of post-SPLIT tables SN1 for the sources.

Amplitude corrections applied to a priori calibrated and fringe-fitted data by self-calibration.
3C345: pdf , or text file , or statistical summary .
J1640+3946: pdf (not available) , or text file (not available) , or statistical summary (not available) .
2023+336: pdf , or text file , or statistical summary .
J1849+3024: pdf (not available) , or text file (not available) , or statistical summary (not available) .
1848+283: pdf , or text file , or statistical summary .
Comments.
As above, but for the post-SPLIT table SN2.

Telescope sensitivities (the total AMP gain applied during both a priori and self calibration; the square of this number gives the antenna noise (SEFD) in Jy).
Comments.
CL4 gain-amp.

Residual closure phase (visibility closure phase with model closure phase subtracted) for:
3C345 .
J1640+3946 (not available) .
2023+336 .
J1849+3024 (not available) .
1848+283 .
Comments.
Separate files per (fringed) source, showing closure phase plots for all the triangles (not just Ef-*-*). Only stokes=I shown.

Calibrated visibilities and the source model of:
3C345 .
J1640+3946 (not available) .
2023+336 .
J1849+3024 (not available) .
1848+283 .
Comments.
For each (fringed) source, plots of amp/phase on Ef-* baselines, calibrated with (post-SPLIT) table CL3, with a model-line overplotted.

Calibrated visibilities against u,v distance for:
3C345: pdf , or png .
J1640+3946: pdf , or png .
2023+336: pdf , or png .
J1849+3024: pdf , or png .
1848+283: pdf , or png .
Comments.
For each source, a plot of amp vs. |uv| distance.

u,v coverage for:
3C345: pdf , or png .
J1640+3946: pdf , or png .
2023+336: pdf , or png .
J1849+3024: pdf , or png .
1848+283: pdf , or png .
Comments.
For each source, a plot of the u-v coverage.

Crude maps of sources:
3C345: pdf , or FITS .
J1640+3946: pdf , or FITS .
2023+336: pdf , or FITS .
J1849+3024: pdf , or FITS .
1848+283: pdf , or FITS .
Comments.
For each source, a CLEAN map resulting from the automated fringing and self-cal iterations (or phase-referencing) in the pipeline script.